Erichsen is offered by Onrion LLC for years at reasonable prices and delivery time to Argentina . Check our web page for products from the brand Erichsen regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Argentina .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
KONISCHER DORNBIEGEPRUFER
Conical Mandrel Bending Tester, EN, ISO, ASTM
Sheet Metal Testing Machine, Model 100 with manual operation, maximum drawing force 30 kN and compliance with the standard adjustable constant blank holding pressure max. 10 kN, with Tiefungsanzeige by counting with 0.1 mm Reading accuracy as well as a Test Tool No. 27 after EN ISO 20482, for testing the deep drawability of sheet metal and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength) in widths of 13-90 mm, by means of the Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE. Weight: approximately 36 kg net Dimensions: approx 340 x 350 x 450 mm (L x W x H)
sheet metal testing machine
(Dry film thickness meter Rossmann 233 ISO, ASTM, BS, FTMS "REFERENCE CLASS" Measuring range: 0 - .mu.m 1000)
[multi cutting device 295 / I with 6 blades and cutting distance 1 mm for cross-cut tests in accordance with EN ISO, ISO, VDA and EN, incl Motion, Polyamide bristle brush and plastic case]
(Having 6 blades, cutting distance for 1 mm Cross Hatch tests in accordance with EN ISO, ISO, VDA, EN, incl. magnifying glass Nylon bristle brush and plastic case)
Mehrschneidengerät
Cutting device 295 / XIV, hard-coated probe mounted in adapter block with holder, for cuts on curved Surfaces, incl. Flexible ruler and Plastic case, with no type M
(Having 6 blades, cutting distance of 2 mm cross hatch tests in accordance with EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass, polyamide bristle brush and plastic case)
(Having 6 blades, cutting distance of 2 mm cross hatch tests in accordance with EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)
(with 6 blades, cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)
Multi-edge trimmer
Hardness Test Model 318 incl. Probe # 1. (After Bosch, 0.75 mm Ø) and 3 springs
Probe cards PK used to determine the opacity of pigmented Paints of all kinds: Type 22/4 - Spread size: 500 cm ²
Indentation hardness tester according to Buchholz DIN 53153 "REFERENCE CLASS" incl. special measuring microscope with lighting
Flow Cup
Dip Flow Cup (Orifice dia. 8 mm), Model 321
(Single spirals to the model 358)
Manual coating thickness gauge
DIN, ISO, ASTM, BS, NF "REFERENCE CLASS" Measuring range: Scale division: 0-125 µm; 5 µm
Ritzstift nach van Laar 426
(Coating thickness gauge Paint Inspection Gauge P.I.G.455 compl. with normal cutting no. 6 for thicknesses to 200 microns and in marker Lederetui)
Sikkens scratching tool 463
Diving flow cup in accordance with nozzle diameter 6 mm
