| BRAND | ProMinent |
| Product | 1019398 |
| Description | Residual Chlorine Sensor |
| Internal code | ONR19537 |
| Weight | 1 |
| Custom code | 90278930 |
| Technical specification | CLE 3.1 mA-5ppm sensor sensor for measuring free chlorine in clear water, with increased selectivity with respect to bound chlorine. Applications include applications in drinking water with higher Proportions of bound chlorine and in swimming pools for Determination of bound chlorine from the total chlorine difference minus free chlorine. Measurement variable: free chlorine Measurement range: 0.05... 5.0 mg/l Reference method: DPD1 pH range: 5.5... 8.0 Temperature: 5... 45°C max. pressure: 1.0 bar Inflow: 30... 60 l/h (in bypass, open outlet of the measurement water) Output signal: 4... 20 mA ~ measurement range temperature compensated, uncalibrated, no galvanic isolation Sensor fitting: DGM or DLG Measurement principle: amperometric, 2 electrodes, membrane-covered Installation in the bypass to the process water line Connection to the controller via control line LiYY 2x0.25 qmm Order number: 725122 (sold by the meter) (Test lead not included) Note: **************** For installation in the DLG III pass-through sensor, a Assembly kit order number 815079 required. (not included) |
Please Contact Us to Order to offer competitive prices and delivery time for ProMinent - 1019398 Residual Chlorine Sensor number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Argentina Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
MEHRSCH.MEMBR FUR S3CAH070580PVTS570W14100C
Mehrsch.Membr. S3_a d178x132 PTFE / EPDM Order number: 1029603
P/N: 792215 / MFV-DK Gr. III 1.5/10bar
Multi-function valve MFV-DK
792957 Ozon-Messzelle OZE 3-mA- 2 ppm
Sensor for measuring ozone in clear water
sensor OZE 3-mA-2ppm
pH sensor
gel-filled pH electrode with glass stem and PTFE ring diaphragm Typical applications: municipal and industrial waste water, drinking water, and Water, chemicals, paper making, food industry. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / Pressure: 0..80 degree C / 6 bar at least conductivity. 50 micro S / cm Installation length: 120 +/- 3mm
305096 -PH -Elektrode PHEX-112-SE
pH electrode
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH Sensor
Sensor
(PH electrode)
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm
Pneumatic dosing pump PNDb Series: PNDb Pneumados B - B Pump Version Pump type 1601 16 bar, 1 l / h, Conn. 6x4 Dosing head: SS stainless steel Seal material: T standard Membr./ PTFE sealing. Dosing head: 0 o.Entlüftung, o.Ventilfeder Hydraul. connection: 0 standard connection Design (logo): 0 with PM Logo Power outlet: 0 terminal G1 / 4, air pressure 6 bar Control Type / Anst: 0 single acting (Standard) Admission: 01 CE Air pressure: 6 BAR Flow rate: 1.0L / H
Absorption Basket Strainer
Absorption Basket Strainer
RH electrode
ORP sensor
1002534 RH -Elektrode RHER-Pt -SE
ORP sensor
pH probe
Diaphragm Metering Pump max. 120 L/h @ max. 4 bar
Sigma 1 Base Type: S1Ba Sigma 1 base type Engine type: H Main power Pump type: 04120 4 bar, 120 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S S. membrane rupture indicator opti. Dosing head: 0 o.Überströmventil, o.Ventilf. Hydraulic Conn: 7 nights Mother &. S-spout PVDF Version: 0 With PM-Logo Electrical connection: S 3ph. 230 / 400V 50 / 60Hz (WBS) Motor version: 0 IP55 (Standard) ISO class F Stroke sensor: 0 No stroke sensor Auto Hublängeneins. 0 stroke length manually Admission: 01 CE Frequency: 50 / 60Hz Voltage: 230 / 400V Power: 0.09KW Protection: IP55 Flow rate: 120 / 144l / h Back pressure: 4 bar
